Sony DVW-709WS/709WSP, DVW-790WS/790WSP Drum Exit Side Checks Play Mode Playing back the tape top

5-1. Tape Running Adjustment

Drum Exit Side

Checks

1.PLAY Mode

(Playing back the tape top)

Enter the play mode at the tape top of ZR2-1/P (from 5 minute to 10 minute segment).

Check that the tape running conditions satisfy the specifications 4.

If the specifications 4 is not satisfied, perform step 9 and higher.

2.F FWD Mode

(Fast forward at tape top)

Enter the F FWD mode at the tape top of ZR2-1/P (from 5 minute to 10 minute segment).

Check that the tape running conditions satisfy the specifications 4.

If the specifications 4 is not satisfied, perform step 9 and higher.

3.REW Mode (Rewind at tape top)

Enter the REW mode at the tape top of ZR2-1/P (from 5 minute to 10 minute segment).

Check that the tape running conditions satisfy the specifications 4.

If the specifications 4 is not satisfied, perform step

9and higher.

4.PLAY Mode (Playback at tape end)

Enter the PLAY mode at the tape end of BCT- D40 (from 30 minute to 40 minute segment). Check that the tape running conditions satisfy the specifications 4.

If the specifications 4 is not satisfied, perform step

9and higher.

Drum Exit Side (Threading End Mode)
T2 tape guide	CUE/TC head
T1 tape guide	Capstan
	T drawer guide
Drum assembly	T3 tape guide
	Tape top sensor

Pinch roller

Slip ring

Drum lead

Tape runs in contact with the upper flange

CUE/TC head

Tape		Capstan
	Drum lead	T drawer guide

Specifications 4:

(A)T2 guide

Tape runs in contact with the upper flange.

Acceptable range of the tape curl is 1/10 or less of a tape width.

(B)T3 guide

Tape runs not in contact with upper and lower flanges.

(C)Drum lead

Tape runs in contact with the drum lead and without any curl.

DVW-790WS/709WS/707	5-7
DVW-790WSP/709WSP/707P P2V1