4-21
DVW-790WS/709WS/707
DVW-790WSP/709WSP/707P P2V1
Removal
1. Brush Cover Removal
(1) Disconnect the connector on the brush assem-
bly board
(2) Remove the two screws and the brush cover.
2. Brush Assembly Removal
(1) Remove one of the screws which secures the
brush base as shown in the figure.
(2) Loosen the other screw and move the brush
base in the direction of the arrow.
In this way the brush and slip ring will release.
(3) Remove the screw and the brush assembly.
n
Never touch the brush.
Brush cover
P 2x2
Brush assembly
Connector
Slip ring P 2x4
Brush
Remove this screw first.
Brush base
4-2. Parts Replacement