2-16 DVW-790WS/709WS/707
DVW-790WSP/709WSP/707P P2V1
2-1. Service Mode
No. Page Item Setup Description
47 MEASUREMENT Turns ON/OFF the functions that implement all the necessary
settings to execute measurements of various characteristics.
(Various settings are returned to the original values when this
item is set to OFF.)
S/N ON/[OFF] Turns ON the necessary settings during S/N measurement.
(DETAIL, APERTURE, CHROMA, GAMMA and MATRIX settings
are set to OFF.)
MODULATION ON/[OFF]
Turns ON the necessary settings during modulation measurement.
(DETAIL, APERTURE, GAMMA and MATRIX settings
are set to OFF.)
RESOLUTION ON/[OFF] Turns ON the necessary settings during resolution measurement.
(MATRIX setting is set to OFF.)
SENSITIVITY ON/[OFF] Turns ON the necessary settings during sensitivity measurement.
(WHITE CLIP and KNEE settings are set to OFF.)
REGISTRATION ON/[OFF]
Turns ON the necessary settings during registration measurement.
(DETAIL and APERTURE settings are set to OFF.)
MASTER BLACK X ([0]) Adjusts the master black
TEST OUT [ENC]/R/G/B
Selects the type of video signal to be output from the TEST OUT connector.
(Same as TEST OUT item of the “FUNCTION 1/2” page)
48 B-SHADING G Used for adjusting the G channel black shading.
H SAW X ([0]) Adjusts the amount of H. SAW correction.
H PARA X ([0]) Adjusts the amount of H. PARA correction.
V SAW X ([0]) Adjusts the amount of V. SAW correction.
V PARA X ([0]) Adjusts the amount of V. PARA correction.
SHAD COMP. [ON]/OFF Turns ON/OFF the G channel black shading correction function.
TEST OUT [ENC]/R/G/B
Selects the type of video signal to be output from the TEST OUT connector.
(Same as TEST OUT item of the “FUNCTION 1/2” page).
49 B-SHADING R Used for adjusting the R channel black shading.
H SAW X ([0]) Adjusts the amount of H. SAW correction.
H PARA X ([0]) Adjusts the amount of H. PARA correction.
V SAW X ([0]) Adjusts the amount of V. SAW correction.
V PARA X ([0]) Adjusts the amount of V. PARA correction.
SHAD COMP. [ON]/OFF Turns ON/OFF the R channel black shading correction function.
TEST OUT [ENC]/R/G/B
Selects the type of video signal to be output from the TEST OUT connector.
(Same as TEST OUT item of the “FUNCTION 1/2” page).
50 B-SHADING B Used for adjusting the B channel black shading.
H SAW X ([0]) Adjusts the amount of H. SAW correction.
H PARA X ([0]) Adjusts the amount of H. PARA correction.
V SAW X ([0]) Adjusts the amount of V. SAW correction.
V PARA X ([0]) Adjusts the amount of V. PARA correction.
SHAD COMP. [ON]/OFF Turns ON/OFF the B channel black shading correction function.
TEST OUT [ENC]/R/G/B
Selects the type of video signal to be output from the TEST OUT connector.
(Same as TEST OUT item of the “FUNCTION 1/2” page).