4-103
DVW-790WS/709WS/707 P2V1
DVW-790WSP/709WSP/707P P2V1
4-2. Parts Replacement
4. Motor Removal
Remote the two screws (b) and removing the mo-
tor.
Removal
1. Manual Eject Assembly Removal
Remove the screw and the manual eject assembly.
(Refer to section 4-4-1.)
2. Cassette Compartment Removal
Remove the three screws and the cassette compart-
ment. (Refer to section 1-8 of Maintenance Manual
Part 1.)
3. Gear Block Assembly Removal
(1) Disconnect the connector CN3 on the CUE-2
board which attaches to the CUE head block.
(2) Remove the three screws.
(3) Lift up the gear block assembly and disconnect
the connector of the tape top sensor from the
SE-275 board. In this way the gear block as-
sembly will remove.
Screws (a)
Screws (b)
PWH 1.4x2.5
Gear block assembly
Connector
(Tape top sensor)
CUE-2 board
CN3