Sony DVW-709WS/709WSP manual Bc Comp.Adj, Vsub, Gain TMP, Saw/Rec, Preknee KS on, AD ADJ AD Gain

2-1. Service Mode

No.	Page	Item	Setup	Description
51	TG Adj.	BC COMP.ADJ.	X ([0])	This item is strictly for adjustment in the factory.
				(Never change the setting.)
		BC	[ON]/OFF	This item is strictly for adjustment in the factory.
				(Never change the setting.)
		FIELD/FRAME	[FIELD]/FRAME	Selects the CCD read-out system (Same as FIELD/FRAME item
				of the “FUNCTION 2/2” page).
				FIELD : Reading in units of field (normal setting).
				FRAME : Reading in units of frame (select for improved vertical resolution).
				Note : The FRAME reading has a more residual image than the FIELD reading.
		TEST OUT	[ENC]/R/G/B	Selects the type of video signal to be output from the TEST OUT connector.
				(Same as TEST OUT item of the “FUNCTION 1/2” page)
		R VSUB	X ([0])	Sets the V substrate voltage value of the R signal.
		G VSUB	X ([0])	Sets the V substrate voltage value of the G signal.
		B VSUB	X ([0])	Sets the V substrate voltage value of the B signal.
52	VA ADJ.1/2	R GAIN (TMP)		Displays the gain value of the R/G/B white balance amplifier.
		G GAIN (TMP)
		B GAIN (TMP)

R MOD.BAL. (TMP) G MOD.BAL. (TMP) B MOD.BAL. (TMP)

Displays the modulation correction values to the R/G/B video amplifier circuits.

		SAW/REC	[SAW]/REC	Selects the TEST signal to be output when the TEST SAW item is turned on.
				SAW	: SAWTOOTH
				REC	: RECTANGULAR
		TEST LEVEL	X ([0])	Adjusts the gain of the TEST signal. (The amplitude of SAWTOOTH and
				RECTANGULAR is automatically set for unity peak level.)
		TEST SAW	ON/[OFF]	Turns ON/OFF the function to forcibly select the TEST signal for
				the video signal system (used for video signal adjustment).
53	VA ADJ.2/2	R PREKNEE (KS ON)	X ([0])	Adjusts the pre-knee level when KNEE SATURATION of the
				R/G/B signal is turned on.
		G PREKNEE (KS ON)	X ([0])
		B PREKNEE (KS ON)	X ([0])
		R PREKNEE	X ([0])	Adjusts the pre-knee level when DCC of the R/G/B signal is turned on.
		G PREKNEE	X ([0])
		B PREKNEE	X ([0])
		TEST OUT	[ENC]/R/G/B	Selects the type of video signal to be output from the TEST OUT connector.
				(Same as TEST OUT item of the “FUNCTION 1/2” page).
		TEST SAW	ON/[OFF]	Turns ON/OFF the function to forcibly select the TEST signal for
				the video signal system (used for video signal adjustment).
54	AD ADJ.	G AD GAIN	X ([0])	Adjusts the gain of the R/G/B video signal respectively that is input
		R AD GAIN	X ([0])	to the A/D converter.
		B AD GAIN	X ([0])	Note : Never change GAIN of the G channel AD converter.
		AD CLOCK PHASE	0 to 7	Adjusts the clock phase of the G signal of the A/D converter.
		R/B CLOCK PHASE	0 to 7	Adjusts the clock phase of the R/B signals of the A/D converter.
55	ND COMP.	ND DETECTION	[OFF]/EXEC/RESET	EXEC : Used for color-correcting the ND filters.
		ND1 DET. =	[YET]/OK!	RESET : The correction values for the ND filters of ND1 to ND4 are reset.
		ND2 DET. =	[YET]/OK!	OFF	: When adjustment is completed, this item returns to the
		ND3 DET. =	[YET]/OK!		OFF position automatically.
		ND4 DET. =	[YET]/OK!
56	VTR ADJ.	EQ ADJUSTMENT	[OFF]/EXEC	Used for playback equalizer automatic adjustment.
		REC CURRENT ADJ.	[OFF]/EXEC	Used for record current automatic adjustment.
		CHECK ERROR RATE	ON/[OFF]	Used for playback equalizer adjustment and recording current
				adjustment.
DVW-790WS/709WS/707					2-17

DVW-790WSP/709WSP/707P P2V1