4-70 DVW-790WS/709WS/707
DVW-790WSP/709WSP/707P P2V1
4-2. Parts Replacement
CN1
PWH 1.4x2.5
CN12
Chassis
boss
Pin of the CUE
link assembly
Pin of the CUE link assembly
Pin of the
Stopper
link assembly
Stopper link
Attention this area
Stop washer
Longitudinal holes
CUE head block
PWH 1.4x2.5
Holes
6. CUE Head Block Installation
(1) Align the CUE link assembly with the position
shown in the figure by hand.
n
In this way the following steps will easily car-
ried out.
(2) Put the two pins of the CUE link assembly in
the two holes of the CUE head block. Put the
pins of the stopper link and chassis in the two
longitudinal holes of the CUE head block.
(3) Attach the CUE head block to the chassis us-
ing the four screws.
(4) Attach the stop washer to the pin of the CUE
link assembly.
(5) Connect the harness connectors to the connec-
tors CN12 on the HN-260 board and CN1 on
the CUE-2 board.