Sony DVW-709WS/709WSP manual Removal Pinch Roller Removal, Installation Install Shaft Cleaning

Removal

1. Pinch Roller Removal

(1)Loosen the center screw of the pinch roller. Lift just above and remove the pinch roller.

(2)Remove the screw from the pinch roller.

Installation

2. Install Shaft Cleaning

Clean a pinch roller install shaft using a cleaning cloth moistened with cleaning fluid.

3. Pinch Roller Installation

Attach the pinch roller to the pinch roller install shaft after the white-marked side is above. Tighten the screw removed in step 1.

4. Pinch Roller Cleaning

Clean the surface of the pinch roller using a clean- ing cloth moistened with cleaning fluid.

	4-2. Parts Replacement
Pinch roller
	White-marks
Pinch roller install shaft	M 1.4x2.5
(cleaning)
	T reel table

Adjustments After Replacement

5.Tape Running Adjustment

(Refer to section 5-1.)

6.CUE Head Height Adjustment

(Refer to section 5-5.)

DVW-790WS/709WS/707 4-31

DVW-790WSP/709WSP/707P P2V1