Sony DVW-709WS/709WSP, DVW-790WS/790WSP Mechanical Deck Replacement, Removing the Mechanical Deck

4-2-26. Mechanical Deck Replacement

1.Removing the Mechanical Deck

(1) Remove the outside panel.

(2) Remove the four screws and remove the me- chanical deck.

	4-2. Parts Replacement
100P connector
	HN-260 board
Cassette	Cassette guide
	Screws
compartment
	(with
arm
	drop-safe)
Screws	Mechanical deck
(with drop-safe)
	assembly

2. Attaching the Mechanical Deck

(1)Hold the sportion of the cassette compartment that is shown by shading in the illustration, or the cassette guide, and the HN-260 board. Then, align the two holes of the mechanical deck assembly with the two pins on the chas- sis, and attach the mechanical deck to the chas- sis.

(2)Press the ornamental panel of the HN-260 board firmly downward, and connect the 100P connector to the mother board.

(3)Tighten the four screws of the mechanical deck assembly.

The standard tightening torque value :

19 x10_2 N.m {1.9 kgf.cm}

DVW-790WS/709WS/707 P2V1

100-pin connector
HN-260 board
Cassette guide	Screws
	(with drop-safe)
Cassette	HN-260 board
compartment
arm
	Mechanical
	deck
	assembly
Screws	Guide hole
(with drop-safe)	Pin of the chassis
	4-117

DVW-790WSP/709WSP/707P P2V1