8-23
DVW-790WS/709WS/707
DVW-790WSP/709WSP/707P P2V1
8-17. Skin Tone Adjustment
Note
Perform this adjustment, if necessary, to suit the custom-
er’s preferences.
Preparation
.On the setup menu, set as follows.
PAGE : S20*LEVEL 3
ITEM : SKIN TONE DETAIL → ON
ITEM : SKIN TONE IND. → ON
.Shoot a person’s face.
Adjustment Procedure
Equipment:Any of color monitor, viewfinder or wave-
form/vector monitor.
Test point :TEST OUT or VIDEO OUT connector
1. Shoot a person’s face in the central of the viewfinder.
2. On the setup menu, set as follows.
PAGE : S20*LEVEL 3
ITEM : SKIN TONE DET. → ?EXEC
3. Push the rotary encoder.
(The detection area is displayed in a zebra pattern.)
4. Perform the adjustment in this step, if neccessary.
On the setup menu, adjust as follows.
PAGE : S20*LEVEL 3
ITEM : SATURATION
(Component in the saturation detection)
HUE (Hue)
WIDTH
(Component in the hue direction)
The skin detail detection area is displayed in a zebra pattern.
Adjust so that zebra pattern displays only proper area.
8-17. Skin Tone Adjustment
SATURATION
HUE
R-Y
B-Y
WIDTH
5. On the setup menu, adjust as follows.
PAGE : S20*LEVEL 3
ITEM : SUPPRESS LEVEL (Factory setting : 0)
Spec. : Set the level to the desired detail level.
Setting After Adjustment
.On the setup menu, set as follows.
PAGE : S20*LEVEL 3
ITEM : SKIN TONE DETAIL → OFF
ITEM : SKIN TONE IND. → OFF
ITEM : SKIN TONE DET. → OFF