2-5
DVW-790WS/709WS/707
DVW-790WSP/709WSP/707P P2V1
No. Page Item Setup Description
11 SETUP CARD READ (→CAM) To be executed by Reads data from the setup card.
pressing the rotary
encoder.
WRITE (→CARD) To be executed by Writes data to the setup card
pressing the rotary
encoder.
ID EDIT The card ID can be set within ten characters using alphanumeric
characters and symbols.
WRITE PROTECT ON/[OFF] Turns ON/OFF the write-inhibit function into the setup card.
WHITE DATA ON/[OFF] Turns ON/OFF the function of reading white balance correction
value from the setup card.
12 FUNCTION 1/2 TEST OUT [ENC]/R/G/B Selection of video signal to be output froth TEST OUT connector.
Note : R-G or B-G can be selected when R-G/B-G SEL on the
first page of OPERATION is set to ON.
DETAIL [ON]/OFF Turns ON/OFF the function of adding detail signal to video for
improving resolution power.
APERTURE [ON]/OFF Sets the aperture correction to ON or OFF.
SKIN TONE DTL ON/[OFF] Turns ON/OFF the skin tone detail function.
MATRIX ON/OFF Turns ON/OFF the linear matrix correction function.
*Default value The highly color saturation can be obtained when this item is set
OFF (J) to ON.
ON (Except J)
GAMMA [ON]/OFF Turns ON/OFF the gamma correction function.
BLACK GAMMA ON/[OFF] Turns ON/OFF the black gamma correction function.
CHROMA [ON]/OFF Turns ON/OFF the function to add chroma signal.
TEST SAW ON/[OFF] Turns ON/OFF the function to add the TEST signal to the video
signal system forcibly. (Used during the video signal adjustment.)
CROSS COLOR FLT
ON/[OFF] Turns ON/OFF the function to reduce the cross-color of video
signal. (NTSC only)
13 FUNCTION 2/2 GENLOCK [ON]/OFF Turns ON/OFF the function of synchronizing the internal reference
signal with the video signal that is input to GENLOCK IN connector.
CAM RET. ON/[OFF] Turns ON/OFF the function of displaying the return video signal
that is input to the GENLOCK IN connector, when the RET button
on the lens is set to ON.
FILTER INH. ON/[OFF] Turns ON/OFF the function of interlocking the filter with the white
balance correction value.
ON : The white balance correction value does not interlock with
the color temperature conversion filter, but is memorized in
the memory A and memory B respectively.
OFF : The white balance correction value is memorized in the
respective memories of memory A (4 memories) and
memory B (4 memories) totaling 8 memories respectively.
FIELD/FRAME [FIELD]/FRAME Sets the CCD read-out method.
FIELD : Reading out in units of field. (Normal setting)
FRAME : Reading out in units of frame.
(Used when the higher vertical resolution is desired)
Note : The FRAME reading has a more residual image than the
FIELD reading.
A.IRIS OVERRIDE ON/[OFF] Turns ON/OFF the iris override function.
When the iris override function is set to ON, reference value of the
AUTO iris adjustment can be modified by the rotary encoder when
the MENU ON/OFF/PAGE switch is set to OFF.
(continued) (5 steps: _1/2, _1/4, 0, +1/4, +1/2 steps of iris stop)
2-1. Service Mode