2-13
DVW-790WS/709WS/707
DVW-790WSP/709WSP/707P P2V1
No. Page Item Setup Description
36 OPERATION 1 R-G/B-G SEL. ON/[OFF] Turns ON/OFF the function of adding the R-G and B-G signal to
the video signal that is output from the TEST OUT connector.
GAMMA TABLE [A]/B/C/D/F Selects the characteristics of the gamma correction.
A :Gamma of x:y = 1:4
B :Gamma of x:y = 1:5
C :Gamma of x:y = 1:4.5
D :Gamma of x:y = 1:0.7
F :Gamma kine film
LOW LIGHT ON/[OFF] Turns ON/OFF the LOW LIGHT indication function of VF.
LOW LIGHT LEVEL X([0]) Sets the starting level of LOW LIGHT indication when the above
described LOW LIGHT function is set to ON.
Note : When menu is being displayed, “L” is indicated instead of
“LOW LIGHT” indication. (example) LOW LIGHT LEVEL : L 0
SELECT BARS SMPTE/EBU/SNG Sets the type of built-in color bars signal
*Default value SMPTE : SMPTE color bars
SMPTE (NTSC) EBU : EBU color bars (PAL)/Full color bars (NTSC)
EBU (PAL) SNG : SNG color bars
WHITE BCH ATW/[AWB] Sets the function of white balance (B-CH)
ATW : Auto tracing white balance
AWB : Auto white balance
BATTERY 10% /20% Sets the blinking (alarm) starting level of the remaining amount of
WARNING battery in ANTON BAUER Inc., battery.
10% : Starts blinking when the remaining amount of battery
voltage reaches about 0.67 V.
20% : Starts showing the 20% display when the remaining
amount of battery voltage reaches about 1.33 V, and starts
blinking at about 1.0 V.
WIDE AWB ON/[OFF] Turns ON/OFF the function of widening the adjustment range of
auto white balance.
ZEBRA ON/[OFF] Turns ON/OFF the zebra pattern indication when a VF that is not
equipped with the ZEBRA switch.
TURBO SW INDEP. ON/[OFF] ON :
Turns ON/OFF the TURBO GAIN function using the TURBO
GAIN button, independent from the GAIN switch (L/M/H).
OFF : Set to OFF during normal operation.
Output level
Input level
x (3%)
y
2-1. Service Mode