7
DVW-790WS/709WS/707
DVW-790WSP/709WSP/707P P2V1
Purpose of this manual This manual is the Maintenance Manual Part 2 Volume 1 of the following models:
Digital Betacam Camcorder
DVW-790WS/709WS/707, DVW-790WSP/709WSP/707P
SDI Output Board BKDW-702
Picture Cache Board BKDW-703
Image Inverter Board BKDW-704
(For DVW-790WS/790WSP/709WS/709WSP only)
This Maintenance Manual Part 2 is intended for use by trained system and service
engineers, and provides the information that promises the parts level service (parts
replacement, guideline for adjustment, schematic diagrams, board layouts, detailed
parts list).
This manual (volume 1) explains about parts replacement and guideline for adjust-
ment.
Contents This Maintenance Manual Part 2 (Volume 1 and 2) is organized by the following
sections:
Section 1 Service Overview
Explains the fixtures, using the extension boards, and precautions for board/part
replacement.
Section 2 Maintenance Mode
Explains the setup menu (service mode) of this unit.
Section 3 Parts Replacement
Explains the replacement of the boards, CCD unit, and external connectors/switches.
Section 4 Mechanical Deck Parts Replacement
Explains the replacement of the parts of the mechanical deck.
Section 5 Tape Path Alignment
Explains the tape path alignment after replacement of parts that are described in
Section 4.
Section 6 VTR System Electrical Alignment
Explains the electrical alignment for VTR system associated with replacement of
parts that are described in Section 3 and 4.
Section 7 Camera System Electrical Alignment
(DVW-790WS/790WSP/709WS/709WSP)
Explains the electrical alignment for Camera system that is required after the DVW-
790WS/790WSP/709WS/709WSP repair is repaird or its board is replaced.
Manual Structure
Maintenance Manual
Part 2 Volume 1
(9-967-819- )