NETGEAR M7100, M4100 manual Enable Igmp mode on the interface 1/0/24

ProSafe M4100 and M7100 Managed Switches

6.Enable IGMP mode on the interface 1/0/24.

(Netgear Switch) (Config)#interface 1/0/24 (Netgear Switch) (Interface 1/0/24)#ip igmp (Netgear Switch) (Interface 1/0/24)#exit

(Netgear Switch) #show ip dvmrp neighbor
Interface			1/0/11
Neighbor IP Address			192.168.3.2
State			Active
Up Time (hh:mm:ss)			00:01:03
Expiry Time (hh:mm:ss)			00:00:24
Generation ID			88099
Major Version			3
Minor Version			255
Capabilities			Prune GenID Missing 11441
Received Routes	...............................		0
Received Bad Packets			0
Received Bad Routes			0
Interface			1/0/3
Neighbor IP Address			192.168.4.1
State			Active
Up Time (hh:mm:ss)			00:01:17
Expiry Time (hh:mm:ss)			00:00:23
Generation ID			1116347728
Major Version			3
Minor Version			255
More Entries or quit(q)
Capabilities			Prune GenID Missing 11441
Received Routes	...............................		0
Received Bad Packets			0
Received Bad Routes			0
(Netgear Switch) #show ip mcast mroute detail summary
	Multicast Route Table Summary
			Incoming	Outgoing
Source IP	Group IP	Protocol	Interface	Interface List
-------------	------------	----------	---------	---------------
192.168.1.2	225.0.0.1	DVMRP	1/0/11	1/0/24

530 Chapter 31. DVMRP