NETGEAR M4100, M7100 manual Select Security ACL Advanced IP ACL

ProSafe M4100 and M7100 Managed Switches

•In the Network Mask field, enter 255.255.255.0.

c.Click Unit 1. The ports display.

d.Click the gray box under port 38 twice until U displays.

The U specifies that the egress packet is untagged for the port.

e.Click Apply to save VLAN 38.

4.Enable IP routing:

a.Select Routing > IP > Basic > IP Configuration. A screen similar to the following displays.

b.Under IP Configuration, make the following selections:

•For Routing Mode, select the Enable radio button.

•For IP Forwarding Mode, select the Enable radio button.

c.Click Apply to enable IP routing.

5.Create an ACL with ID 101.

a.Select Security > ACL > Advanced > IP ACL. A screen similar to the following displays.

b.In the IP ACL Table, in the IP ACL ID field, enter 101.

c.Click Add.

6.Create an ACL with ID 102.

a.Select Security > ACL > Advanced > IP ACL.

Chapter 10. ACLs 163