ProSafe M4100 and M7100 Managed Switches

b.Under Binding Configuration, make the following selection and enter the following information:

In he ACL ID field, select 101.

In the Sequence Number field, enter 1.

c.Click Unit 1. The ports display.

d.Click the gray box under port 48. A check mark displays in the box.

e.Click Apply to save the settings.

13.Apply ACL 103 to port 24 and port 48:

a.Select Security > ACL > Advanced > IP Binding Configuration. A screen similar to the following displays.

b.Under Binding Configuration, make the following selection and enter the following information:

In the ACL ID field, select 103.

In the Sequence Number field, enter 2.

c.Click Unit 1. The ports display. Configure the following ports:

Click the gray box under port 24. A check mark displays in the box.

Click the gray box under port 48. A check mark displays in the box.

d.Click Apply to save the settings.

Set up a MAC ACL with Two Rules

The example is shown as CLI commands and as a Web interface procedure.

Chapter 10. ACLs 169

Page 169
Image 169
NETGEAR M4100, M7100 manual Set up a MAC ACL with Two Rules