NETGEAR M7100, M4100 manual Source Address field, enter Destination Address field, enter

ProSafe M4100 and M7100 Managed Switches

a.Select Routing > IP > Advanced > IP Interface Configuration. A screen similar to the following displays.

b.Under IP Interface Configuration, scroll down and select the Port 1/0/1 check box. Now 1/0/1 appears in the Interface field at the top.

•In the IP Address field, enter 192.168.1.1.

•In the Subnet Mask field, enter 255.255.255.0.

•In the Routing Mode field, select Enable.

c.Click Apply.

4.Create a 6-in-4 tunnel interface.

a.Select Routing > IPv6 > Advanced > Tunnel Configuration. A screen similar to the following displays.

b.In the Tunnel Id list, select 0.

c.In the Mode field, select 6-in-4-configured.

d.In the Source Address field, enter 192.168.1.1.

e.In the Destination Address field, enter 192.168.1.2.

f.Click Apply.

5.Assign an IPv6 address to the tunnel.

418 Chapter 26. Tunnel