NETGEAR M7100, M4100 manual PIM-DM on Switch B

ProSafe M4100 and M7100 Managed Switches

PIM-DM on Switch B:

1.Enable IP routing on the switch.

a. Select Routing > IP > Basic > IP Configuration. A screen similar to the following displays.

b.For Routing Mode, select the Enable radio button.

c.Click Apply.

2.Configure 1/0/10 as a routing port and assign an IP address to it.

a.Select Routing > IP > Advanced > IP Interface Configuration. A screen similar to the following displays.

b.Scroll down and select the Port 1/0/10 check box. Now 1/0/10 appears in the Port field at the top.

c.Enter the following information:

•In the IP Address field, enter 192.168.3.2.

•In the Subnet Mask field, enter 255.255.255.0.

•In the Routing Mode field, select Enable.

d.Click Apply to save the settings.

3.Configure 1/0/11 as a routing port and assign an IP address to it.

a.Select Routing > IP > Advanced > IP Interface Configuration.

446 Chapter 28. PIM