NETGEAR M4100, M7100 manual Redistribute Mode field, select Enable, Server Address field, enter

ProSafe M4100 and M7100 Managed Switches

A screen similar to the following displays.

b.In the Source field, select Connected.

c.In the Redistribute Mode field, select Enable.

d.Click Apply to save the settings.

7.Enable DHCP L3 relay.

a.Select System > Services > DHCP Relay. A screen similar to the following displays.

b.For Admin Mode, select the Enable radio button.

c.Click Apply to save the settings.

8.Configure the DHCP server IP address.

a.Select System > Services > UDP Relay. A screen similar to the following displays.

b. In the Server Address field, enter 10.100.1.1.

Chapter 29. DHCP L2 Relay and L3 Relay 503