HP 7000 dl Router manual Clear spanning-tree counters interface interface

SROS Command Line Interface Reference Guide Enable Mode Command Set

clear spanning-tree counters [interface <interface>]

The clear spanning-tree counters command clears the following counts: BPDU transmit, BPDU receive, and number of transitions to forwarding state.

Syntax Description

interface <interface> Optional. Specifies a single interface. Enter clear spanning-tree counters ? for a complete list of interfaces.

Default Values

No default value necessary for this command.

Command Modes

# Enable mode

Usage Examples

The following example clears the spanning tree counters for Ethernet 0/1:

>enable

#clear spanning-tree counters interface eth 0/1

5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 46