HP 7000 dl Router manual Ip dhcp renew

SROS Command Line Interface Reference Guide Ethernet Interface Configuration Command Set

ip dhcp renew

Use the ip dhcp renew command to transmit a message to the DHCP server requesting renewal of the IP address lease on that interface.

Default Values

No defaults necessary for this command.

Command Modes

Ethernet Interface Configuration Modes

Functional Notes

Dynamic Host Configuration Protocol (DHCP) allows interfaces to acquire a dynamically assigned IP address from a configured DHCP server on the network. Many Internet Service Providers (ISPs) require the use of DHCP when connecting to their services. Using DHCP reduces the number of dedicated IP addresses the ISP must obtain.

Usage Examples

The following example renews the IP address assigned (by DHCP) on the Ethernet interface (eth 0/1):

(config)#int eth 0/1 (config-eth 0/1)#ip dhcp renew

5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 456