HP 7000 dl Router manual #show interfaces fr

SROS Command Line Interface Reference Guide Enable Mode Command Set

0 runts 0 giants 0 throttles

0 input errors 0 CRC 0 frame

0 abort 0 ignored 0 overruns

81 packets output 11496 bytes 0 underruns

0 input clock glitches 0 output clock glitches

0 carrier lost 0 cts lost

#show interfaces fr 1

TDM group 10 line protocol is UP Encapsulation FRAME-RELAY (fr 1)

463 packets input 25488 bytes 0 no buffer

0 runts 0 giants 0 throttles

0 input errors 0 CRC 0 frame

0 abort 0 ignored 0 overruns

864 packets output 239993 bytes 0 underruns

0 input clock glitches 0 output clock glitches

0 carrier lost 0 cts lost

Line Status: -- No Alarms --

Current Performance Statistics:

0 Errored Seconds 0 Bursty Errored Seconds

0 Severely Errored Seconds 0 Severely Errored Frame Seconds

0 Unavailable Seconds 0 Path Code Violations

0 Line Code Violations 0 Controlled Slip Seconds

0 Line Errored Seconds 0 Degraded Minutes

#show interfaces fr 1.100*

fr 1.100 is Active

Ip address is 63.97.45.57, mask is 255.255.255.248 Interface-dlci is 100

MTU is 1500 bytes, BW is 96000 Kbit (limited) Average utilization is 53%

*Note: If the user has configured a Bc and Be value on the virtual circuit, the bandwidth (BW) displayed is the sum of those values (Bc + Be). If not, the value for BW is the speed of the interface. The Average utilization displayed is the average utilization of the displayed bandwidth. If the bandwidth number is the Bc + Be value, the (limited) text appears (as shown above).

5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 134