HP 7000 dl Router manual Version version, Config#router rip config-rip#version

Router (RIP) Configuration Command Set

version <version>

Use the version command to specify (globally) the Routing Information Protocol (RIP) version used on all IP interfaces. This global configuration is overridden using the configuration commands ip rip send version and ip rip receive version. Use the no form of this command to return to the default value.

Syntax Description

<version>	Specifies the RIP version used globally
1	RIP version 1
2	RIP version 2

Default Values

By default, RIP is not enabled.

Command Modes

(config-rip)# Router (RIP) Configuration Mode required

Usage Examples

The following example specifies RIP version 2 as the global RIP version:

(config)#router rip (config-rip)#version 2

5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 902