HP 7000 dl Router manual Show ip igmp groups group-address, Enable #show ip igmp groups

SROS Command Line Interface Reference Guide Enable Mode Command Set

show ip igmp groups <group-address>

Use the show ip igmp groups command to display the multicast groups that have been registered by directly connected receivers using IGMP. If no group-address is specified, all groups are shown with this command.

Syntax Description

<group-address>Optional. IP address of a multicast group.

Default Values

No default value necessary for this command.

Command Modes

# Enable Command Mode

Usage Examples

The following is sample output from this command:

>enable
#show ip igmp groups
IGMP Connected Group Membership
Group Address	Interface	Uptime	Expires	Last Reporter
172.0.1.50	Loopback100	00:42:57	00:02:50	172.23.23.1
172.1.1.1	Ethernet0/1	00:05:26	00:02:51	1.1.1.2
172.1.1.1	Loopback100	00:42:57	00:02:51	172.23.23.1

5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 149