HP 7000 dl Router manual Ip ospf network broadcast point-to-point

SROS Command Line Interface Reference Guide Frame Relay Sub-Interface Config Command Set

ip ospf network [broadcast point-to-point]

Use the ip ospf network command to specify the type of network on this interface.

Syntax Description

broadcast	Set the network type for broadcast.
point-to-point	Set the network type for point-to-point.

Default Values

By default, Ethernet defaults to broadcast. PPP and Frame Relay default to point-to-point.

Command Modes

(config-interface)#	Interface Configuration Mode
	Valid interfaces include: Ethernet (eth 0/1), virtual PPP interfaces (ppp 1), virtual
	Frame Relay sub-interfaces (fr 1.20), and loopback interfaces

Functional Notes

A point-to-point network will not elect designated routers.

Usage Examples

The following example designates a broadcast network type:

(config-fr 1.16)#ip ospf network broadcast

5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 631