HP 7000 dl Router Certificate Configuration Command SET, Certificate Configuration Command Set

SROS Command Line Interface Reference Guide Certificate Configuration Command Set

CERTIFICATE CONFIGURATION COMMAND SET

To activate the Certificate Configuration , enter the crypto ca certificate chain command at the Global Configuration Mode prompt. For example:

Router>enable

Router#configure terminal

Router(config)#crypto ca certificate chain MyProfile

Router(config-cert-chain)#

The following commands are common to multiple command sets and are covered in a centralized section of this guide. For more information, refer to the sections listed below:

do on page 928 end on page 929 exit on page 930

All other commands for this command set are described in this section in alphabetical order.

certificate <serial-number>on page 430 certificate ca <serial-number>on page 431

crl on page 432

5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 429