HP 7000 dl Router manual Backup connect-timeout seconds

SROS Command Line Interface Reference Guide Frame Relay Sub-Interface Config Command Set

backup connect-timeout <seconds>

Use the backup connect-timeoutcommand to specify the number of seconds to wait for a connection after a call is attempted before trying to call again or dialing a different number. It is recommended this number be greater than 60.

Syntax Description

<seconds>	Selects the amount of time in seconds that the router will wait for a connection
	before attempting another call (valid range: 10 to 300)

Default Values

<seconds> 60 seconds

Command Modes

(config-fr 1.16)# Virtual Frame Relay Sub-Interface Configuration Mode required

Usage Examples

The following configures the Secure Router OS to wait 120 seconds before retrying a failed backup call:

(config)#interface fr 1.16

(config-fr 1.16)#backup connect-timeout 120

5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 609