HP 7000 dl Router manual Enable #show ip ospf neighbor

SROS Command Line Interface Reference Guide Enable Mode Command Set

show ip ospf neighbor <interface type> <interface number> <neighbor id> [detail]

Use the show ip ospf neighbor command to display OSPF neighbor information for a specific interface.

Syntax Description

<interface type>	Optional. Enter the interface type (i.e., eth, ppp, etc.).
<interface number>	Optional. Enter the interface number.
<neighbor id>	Optional. Enter a specific neighbor’s router ID.
detail	Optional. Enter this keyword to display details on all neighbors.

Default Values

No default value necessary for this command.

Command Modes

# Enable Command Mode

Usage Examples

>enable

#show ip ospf neighbor

5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 157