HP 7000 dl Router manual Show access-lists listname, #show access-lists

SROS Command Line Interface Reference Guide Enable Mode Command Set

show access-lists <listname>

Use the show access-listscommand to display all configured access lists in the system (or a specific list).

Syntax Description

<listname> Optional. Specify a particular access list to display.

Default Values

No default value necessary for this command.

Command Modes

# Enable Mode

Functional Notes

The show access-lists command displays all configured access-lists in the system. All entries in the access list are displayed, and a counter indicating the number of packets matching the entry is listed.

Usage Examples

The following is a sample output from the show access-lists command:

>enable

#show access-lists

Standard access list MatchAll permit host 10.3.50.6 (0 matches)

permit 10.200.5.0 wildcard bits 0.0.0.255 (0 matches) extended access list UnTrusted

deny icmp 10.5.60.0 wildcard bits 0.0.0.255 any source-quench (0 matches) deny tcp any (0 matches)

5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 104