HP 7000 dl Router manual Interface, Enable #clear spanning-tree detected-protocols

SROS Command Line Interface Reference Guide Enable Mode Command Set

clear spanning-tree detected-protocols [interface ethernet <interface id>]

Use the clear spanning-treedetected-protocolscommand to restart the protocol migration process.

Syntax Description

interface	Optional. Choose the ethernet interface.
<interface id>	Optional. Enter a valid interface ID (e.g., 0/1 for Ethernet 0/1).

Default Values

No default value necessary for this command.

Command Modes

# Enable Command Mode

Functional Notes

The ProCurve Secure Router has the ability to operate using the rapid spanning-tree protocol or the legacy 802.1D version of spanning-tree. When a BPDU (bridge protocol data unit) of the legacy version is detected on an interface, the ProCurve Secure Router automatically regresses to using the 802.1D spanning-tree protocol for that interface. Issue the clear spanning-treedetected-protocolscommand to return to rapid spanning-tree operation.

Usage Examples

The following example re-initiates the protocol migration process on eth 0/2:

>enable

#clear spanning-tree detected-protocols interface ethernet 0/2

The following example re-initiates the protocol migration process on all interfaces:

>enable

#clear spanning-tree detected-protocols

5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 47