HP 7000 dl Router manual Bonding txdeq-timer seconds

SROS Command Line Interface Reference Guide BRI Interface Configuration Command set

bonding txdeq-timer <seconds>

Use the bonding txdeq-timercommand to specify the value (in seconds) for the network delay equalization timeout. Use the no form of this command to return to the default value.

Syntax Description

<seconds>	Specifies the number of seconds the endpoint allots for attempting to equalize the
	network delay between bearer channels before considering the BONDING
	negotiation a failure

Default Values

<seconds> 50 seconds

Command Modes

(config-bri 1/2)# BRI Interface Configuration Mode required

Functional Notes

Specifies the length of time both endpoints allot to attempt to equalize the network delay between the bearer channels before deciding the BONDING call has failed.

Usage Examples

The following example defines a txdeq-timer value of 80 seconds:

(config)#interface bri 1/2

(config-bri 1/2)#bonding txdeq-timer 80

5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 559