HP 7000 dl Router manual Bonding txcid-timer seconds

SROS Command Line Interface Reference Guide BRI Interface Configuration Command set

bonding txcid-timer <seconds>

Use the bonding txcid-timercommand to specify the value (in seconds) for the bearer channel (B-channel) negotiation timeout. Use the no form of this command to return to the default value.

Syntax Description

<seconds>	Specifies the number of seconds the endpoint allots for negotiating data rates and
	channel capacities before considering the BONDING negotiation a failure

Default Values

<seconds> 5 seconds

Command Modes

(config-bri 1/2)# BRI Interface Configuration Mode required

Functional Notes

Specifies the length of time both endpoints attempt to negotiate an agreeable value for bearer channels and channel capacities before deciding the BONDING call has failed.

Usage Examples

The following example defines a txcid-timer value of 8 seconds:

(config)#interface bri 1/2 (config-bri 1/2)#bonding txcid-timer 8

5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 558