HP 7000 dl Router Ip firewall policy-log threshold value, Config#ip firewall policy-log threshold

SROS Command Line Interface Reference Guide Global Configuration Mode Command Set

ip firewall policy-log threshold <value>

Use the ip firewall policy-log threshold command to specify the number of connections required by an access control policy before the Secure Router OS will generate a log message. Use the no form of this command to return to the default threshold.

Note	The Secure Router OS security features must be enabled (using the ip firewall command)
	for the stateful inspection firewall to be activated.
Syntax DescriptionSyntax Description
<value>	Specifies the number of access policy connections the Secure Router OS will
	identify before generating a log message (valid range: 0 to 4294967295).

Default Values

<value>100

Command Modes

(config)# Global Configuration Mode

Usage Examples

The following example specifies a threshold of 15 connections before generating a log message:

(config)#ip firewall policy-log threshold 15

5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 282