HP 7000 dl Router manual Netbios-node-type type, Config-dhcp#netbios-node-type

SROS Command Line Interface Reference Guide DHCP Pool Command Set

netbios-node-type <type>

Use the netbios-node-typecommand to specify the type of NetBIOS node used with Dynamic Host Configuration Protocol (DHCP) clients. Use the no form of this command to remove a configured NetBIOS node type.

Syntax Description

<type>	Specifies the NetBIOS node type used with DHCP clients.
	Valid node types are as follows:
	b-node (1)	- Broadcast node
	p-node (2)	- Peer-to-Peer node
	m-node(4) - Mixed node
	h-node (8)	- Hybrid node (Recommended)
	Alternately, the node type can be specified using the numerical value listed next to
	the nodes above (valid range: 1 to 8).

Default Values

<type> h-node(8) - Hybrid node

Command Modes

(config-dhcp)# DHCP Pool

Usage Examples

The following example specifies a client’s NetBIOS node type as h-node:

(config)#ip dhcp-server pool MyPool (config-dhcp)#netbios-node-type h-node

Alternately, the following also specifies the client’s NetBIOS node type as h-node:

(config-dhcp)#netbios-node-type 8

5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 367