HP 7000 dl Router manual Show ip bgp, #show ip bgp

SROS Command Line Interface Reference Guide Enable Mode Command Set

show ip bgp

Use the show ip bgp command to display a summary of the BGP table.

Syntax Description

No subcommands.

Default Values

No default value necessary for this command.

Command Modes

# Enable Command Mode

Functional Notes

Entries that are not filtered by prefix lists are marked with an asterisk (*) to show they are valid. Entries that are deemed the best path to advertised route are marked with a caret (>).

Usage Examples

The following shows sample output of the command:

#show ip bgp

BGP local router ID is 10.0.0.1, local AS is 101.

Status codes: * valid, > best, i - internal

Origin codes: i - IGP, e - EGP, ? - incomplete

Network	NextHop	Metric Path
*> 1.0.0.0/8	10.15.43.17	1 100 i
*> 2.0.0.0/9	10.15.43.17	1 100 i
*> 2.128.0.0/10	10.15.43.17	1 100 i

5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 142