Config#logging email priority-level warning

SROS Command Line Interface Reference Guide	Global Configuration Mode Command Set

logging email priority-level [error fatal info notice warning]

Use the logging email priority-levelcommand to set the threshold for events sent to the addresses specified using the logging email address-listcommand. All events with the specified priority or higher will be sent to all addresses in the list. The logging email on command must be enabled. See logging email priority-level [error fatal info notice warning] on page 315 and logging email on on page 314 for related information. Use the no form of this command to return to the default priority.

Syntax Description

Sets the minimum priority threshold for sending messages to email addresses specified using the logging email address-listcommand.

The following priorities are available (ranking from lowest to highest):

Info

When selected, all events are logged.

Notice

When selected, events with notice, warning, error, and fatal priorities are logged.

Warning

When selected, events with warning, error, and fatal priorities are logged.

Error

When selected, events with error and fatal priorities are logged.

Fatal

When selected, only events with a fatal priority are logged.

Default Values

<priority>warning

Command Modes

(config)#

Global Configuration Mode required

Usage Examples

The following example sends all messages with warning level or greater to the email addresses listed using the logging email address-listcommand: