HP 7000 dl Router manual Spanning-tree forward-time seconds

SROS Command Line Interface Reference Guide Global Configuration Mode Command Set

spanning-tree forward-time <seconds>

Use the spanning-treeforward-timecommand to specify the delay interval (in seconds) when forwarding spanning-tree packets. Use the no form of this command to return to the default interval.

Syntax Description

<seconds>Forward delay interval in seconds (Range: 4 to 30).

Default Values

<seconds>15 seconds

Command Modes

(config)# Global Configuration Mode required

Usage Examples

The following example sets the forwarding time to 15 seconds: (config)#spanning-treeforward-time 15

5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 348