HP 7000 dl Router manual Copyright 2005 Hewlett-Packard Development Company, L.P 648

SROS Command Line Interface Reference Guide ATM Sub-Interface Config Command Set

access-policy <policyname>

Use the access-policycommand to assign a specified access policy for the inbound traffic on an interface. Use the no form of this command to remove an access policy association.

Configured access policies will only be active if the ip firewall command has been entered at the Global Configuration Mode prompt to enable the Secure Router OS security features.

Note All configuration parameters are valid, but no security data processing will be attempted unless the security features are enabled.

Syntax Description

<policyname>	Alphanumeric descriptor for identifying the configured access policy (all access
	policy descriptors are case-sensitive)

Default Values

By default, there are no configured access policies associated with an interface.

Command Modes

(config-interface)#	Interface Configuration Mode
	Valid interfaces include: ATM sub-interface, Ethernet, PPP virtual interfaces,
	Frame Relay virtual sub-interfaces, and VLAN interface.

Functional Notes

To assign an access policy to an interface, enter the Interface Configuration Mode for the desired interface and enter access policy <policy name>.

5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 648