HP 7000 dl Router manual Enable, Command Reference GuideUnderstanding Configuration Modes

Command Reference GuideUnderstanding Configuration Modes

Level	Access by...	Prompt	With this level you can...
Enable	entering enable while in the	#	• manage the startup and running
	Basic command security level			configurations
	as follows:		•	use the debug commands
	>enable		•	enter any of the configuration modes

Note	To prevent unauthorized users from accessing the configuration functions of your product,
	immediately install an Enable-level password. Refer to the Quick Configuration Guides
	and Quick Start Guides located on the Secure Router OS Documentation CD provided
	with your unit for more information on configuring a password.

Understanding Configuration Modes

The Secure Router OS has four configuration modes to organize the configuration commands – Global, Line, Router, and Interface. Each configuration mode supports a set of commands specific to the configurable parameters for the mode. For example, all Frame Relay configuration commands are accessible only through the Interface Configuration Mode (for the virtual Frame Relay interface). The following table contains a brief description of each level.

Mode	Access by...	Sample Prompt	With this mode you
			can...
Global	entering config while at the Enable	(config)#	•	set the system’s
	command security level prompt.			Enable-level
	For example:			password(s)
	>enable		•	configure the
	#config term			system global IP
				parameters
			•	configure the SNMP
				parameters
			• enter any of the
				other configuration
				modes
Line	specifying a line (console or Telnet)	(config-con0)#	•	configure the
	while at the Global Configuration Mode			console terminal
	prompt.			settings (datarate,
	For example:			login password,
	>enable			etc.)
	#config term		•	create Telnet logins
	(config)#line console 0			and specify their
				parameters (login
				password, etc.)

5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 5