Memory Module Upgrade Kits
The system is upgradable to 4 GB by installing combinations of
Memory Module Installation Guidelines
•If only one memory module is installed, it must be installed in connector DIMM_1.
•If only one memory module is installed in connector DIMM_1, its capacity must be 512 MB.
•If more than one memory module is installed, the memory modules must be installed in pairs of matched memory size, speed, and technology.
•Memory modules must be installed in ordered pairs in connectors DIMM_1 and DIMM_2, and then DIMM_3 and DIMM_4.
•If a processor with a slower
NOTICE: If you remove your original memory modules from the system during a memory upgrade, keep them separate from any new memory modules that you may have, even if you purchased the new memory modules from Dell. Use only unregistered or unbuffered ECC DDR II memory modules.
Table
Table 3-2. Memory Configuration Guidelines
Total Memory | DIMM_1 | DIMM_2 | DIMM_3 | DIMM_4 |
|
|
|
|
|
512 MB | 512 MB | none | none | none |
1 GB | 512 MB | 512 MB | none | none |
2 GB | 512 MB | 512 MB | 512 MB | 512 MB |
2 GB | 1 GB | 1 GB | none | none |
3 GB | 1 GB | 1 GB | 512 MB | 512 MB |
4 GB | 1 GB | 1 GB | 1 GB | 1 GB |
|
|
|
|
|
Addressing Memory With
Your system supports a maximum of 4 GB of memory using four
NOTE: Depending on the type of PCI/PCIe expansion cards that are installed in your system, your system may only support a maximum of 3.4 GB of memory or less.
Installing System Components
59