Dell SC440 Dimm socket, PCI Info, Diskette drive default, Hard drives, and USB devices, Speed

Table 2-2. System Options (continued)

Option	Description
Memory Info	Displays the amount of Installed Memory, Memory Speed, Memory
	Channel Mode, and a description of the Memory Technology. This option
	also displays a table that describes the memory size, whether the memory
	module is ECC capable, single or dual rank, type, and organization for each
	DIMM socket.
PCI Info	Displays the types of cards that are installed in the PCI slots, if applicable.
Date/Time	Resets the system’s internal calendar and clock.
Boot Sequence	Determines the order in which the system searches for boot devices during
(Diskette drive default)	system startup. Available options can include the diskette drive, CD drive,
	hard drives, and USB devices.
Table 2-3. Drive Options
Option	Description
Diskette Drive	Enables and disables the diskette drives and sets read permission for the
(Internal default)	internal diskette drive. Off disables all diskette drives. USB disables the
	internal diskette drive and enables a USB drive if the USB controller is
	enabled and a USB drive is connected. Internal enables the internal
	diskette drive. Read Only enables the internal drive controller and allows
	the internal diskette drive read-only permission.
	NOTE: Diskette drives are optional and may not be part of your system.
SATA0-3	Enables or disables a Serial Advanced Technology Attachment (SATA)
	device (such as hard drive, CD drive, or DVD drive). Off disables the
	interface so that the device cannot be used. On enables the interface so
	that the device can be used.
	Displays the Controller type, Port number the drive is using, Drive ID
	number, Capacity, whether the drive is controlled by the BIOS, and Link
	Speed.
PATA0-1	Enables or disables a Parallel Advanced Technology Attachment device
	(such as hard drive or IDE drive). Off disables the interface so that the
	device cannot be used. On enables the interface so that the device can be
	used.
	Displays the Controller type, Port number the drive is using, Drive ID
	number, Capacity, whether the drive is controlled by the BIOS, and Link
	Speed.
SMART Reporting	Determines whether hard-drive errors for internal drives are reported during
(Off default)	system startup. Off does not report errors. On reports errors.

30

Using the System Setup Program