Table 1-6. System Messages (continued)
Message | Causes | Corrective Actions |
|
|
|
Operating system not found |
| See "Troubleshooting a Hard Drive" on |
|
| page 91. If the problem persists, see |
|
| "Getting Help" on page 107. |
Please connect USB keyboard/mouse to USB ports on the back of the computer
The keyboard and/or mouse is not properly connected.
See "Troubleshooting a USB Device" on page 82.
Plug and play | An attached device is improperly | See "Troubleshooting Your System" on |
configuration error | configured. | page 79. |
|
|
|
Read fault | The operating system cannot read | See "Troubleshooting a Diskette Drive" |
| from the diskette or hard drive, the | on page 89 or "Troubleshooting a Hard |
| system could not find a particular | Drive" on page 91. |
| sector on the disk, or the requested |
|
| sector is defective. |
|
Requested sector not found The operating system cannot read from the diskette or hard drive, the system could not find a particular sector on the disk, or the requested sector is defective.
See "Troubleshooting a Diskette Drive" on page 89 or "Troubleshooting a Hard Drive" on page 91.
Reset failed | The disk reset operation failed. |
See "Troubleshooting a Diskette Drive" on page 89 or "Troubleshooting a Hard Drive" on page 91.
Sector not found | A faulty diskette drive or hard drive. | See "Troubleshooting a Diskette Drive" |
Seek error |
| on page 89 or "Troubleshooting a Hard |
| Drive" on page 91. | |
|
| |
|
|
|
Shutdown failure | A chip on the system board might be | Run the system diagnostics. See |
| malfunctioning. | "Running the System Diagnostics" on |
|
| page 97. |
The amount | of system | Memory has been added or removed, |
memory has | changed | or a memory module may be faulty. |
If memory has been added or removed, this message is informative and can be ignored. If memory has not been added or removed, check the SEL to determine if
The file being copied is too large for the destination drive.
The file that you are trying to copy is too large to fit on the disk.
Try increasing disk space on the destination drive by deleting unnecessary files.
24
