Dell SC440 Accessing System Features During Startup, Diagnostics on, Information, Ctrl+S

•Release notes or readme files may be included to provide last-minute updates to the system or documentation or advanced technical reference material intended for experienced users or technicians.

Accessing System Features During Startup

Table 1-1 describes keystrokes that may be entered during startup to access system features. If your operating system begins to load before you enter the keystroke, allow the system to finish booting, and then restart your system and try again.

Table 1-1. Keystrokes for Accessing System Features

Keystroke	Description
<F2>	Enters the System Setup program. See "Using the System Setup Program" on page 27.
<F10>	Opens the utility partition, allowing you to run the system diagnostics. See "Running the System
	Diagnostics" on page 98.
<F11>	Enters the boot menu selection screen, allowing you to choose a boot device.
<F12>	Initiates PXE boot.
<Ctrl+C>	Option is displayed for some SAS controller expansion cards. Enters the SAS Configuration Utility,
	which includes RAID configuration options. See your SAS adapter User’s Guide for more
	information.
<Ctrl+S>	Option is displayed only if you have PXE support enabled through the System Setup Program (see
	Table 2-1). This keystroke allows you to configure NIC settings for PXE boot. For more
	information, see the documentation for your integrated NIC.

10

About Your System