Dell SC440 owner manual System Messages

Table 1-5. Diagnostic Indicator Codes (continued)

Code	Causes	Corrective Action
	Possible video failure.	See "Getting Help" on page 107.
	Diskette drive or hard	Ensure that the diskette drive and hard drive
	drive failure.	are properly connected. See "Hard Drives" on
		page 51 or "Diskette Drive" on page 44 for
		information on the drives installed in your
		system.
	Possible USB failure.	See "Troubleshooting a USB Device" on
		page 82.
	No memory modules	See "Troubleshooting System Memory" on
	detected.	page 87.
	System board failure.	See "Getting Help" on page 107.
	Memory configuration	See "Troubleshooting System Memory" on
	error.	page 87.
	Possible system board	See "Getting Help" on page 107.
	resource and/or system
	board hardware failure.
	Possible system resource	See "Troubleshooting IRQ Assignment
	configuration error.	Conflicts" on page 80. If the problem persists,
		see "Getting Help" on page 107.
	Other failure.	Ensure that the diskette drive, optical drive,
		and hard drives are properly connected. See
		"Troubleshooting Your System" on page 79 for
		the appropriate drive installed in your system.
		If the problem persists, see "Getting Help" on
		page 107.

System Messages

System messages appear on the screen to notify you of a possible problem with the system. Table 1-6 lists the system messages that can occur and the probable cause and corrective action for each message.

NOTE: If you receive a system message that is not listed in Table 1-6, check the documentation for the application that is running when the message appears or the operating system's documentation for an explanation of the message and recommended action.

16

About Your System