Dell SC440 owner manual Installing the Chassis Intrusion Switch

Figure 3-20. Removing and Installing the Chassis Intrusion Switch

1

2

3

1 chassis intrusion switch 2 securing bracket notch 3 INTRUDER connector

Installing the Chassis Intrusion Switch

1Align the chassis intrusion switch with the securing bracket notch. See Figure 3-20.

2Slide the switch into the securing bracket notch.

3Connect the switch cable to the INTRUDER connector on the system board.

4Close the system. See "Closing the System" on page 41.

5Reconnect the system to the electrical outlet, and turn on the system.

72

Installing System Components