Table 1-6. System Messages (continued)
Message | Causes | Corrective Actions |
|
|
|
Memory data line failure | A memory module might be faulty or | Reinstall the memory modules and, if |
at address, read value | improperly seated. | necessary, replace them. See |
expecting value |
| "Troubleshooting System Memory" on |
Memory double word logic |
| page 87. |
|
| |
failure at address, read |
|
|
value expecting value |
|
|
Memory odd/even logic |
|
|
failure at address, read |
|
|
value expecting value |
|
|
Memory write/read failure |
|
|
at address, read value |
|
|
expecting value |
|
|
|
|
|
Memory size in CMOS | The amount of memory recorded in | Restart the system. If the error message |
invalid | the system configuration information | appears again, see "Troubleshooting |
| does not match the memory installed | System Memory" on page 87. If the |
| in the system. | problem persists, see "Getting Help" on |
|
| page 107. |
|
|
|
Memory type or speed is not |
| See "Troubleshooting System Memory" |
supported on this system. |
| on page 87. |
Please refer to system |
|
|
documentation for support |
|
|
memory configurations. |
|
|
|
|
|
NIC failure. |
| See "Troubleshooting a NIC" on page 83. |
|
|
|
No boot device available | The system cannot find the diskette or | If the diskette drive is your boot device, |
| hard drive. | ensure that a bootable disk is in the |
|
| drive. |
|
| If the hard drive is your boot device, |
|
| ensure that the hard drive is installed, |
|
| the interface cable is properly connected, |
|
| and the hard drive is partitioned as a |
|
| boot device. |
|
| Enter the System Setup program and |
|
| verify the boot sequence information. |
|
| See "Using the System Setup Program" |
|
| on page 27. |
22
