Dell SC440 owner manual Optical and Tape Drives, Removing an Optical or Tape Drive

17(Optional) Test the drive by running the system diagnostics. See "Running the System Diagnostics" on page 97.

Optical and Tape Drives

In the upper 5.25-inch drive bay, you can install only an optical drive. In the lower 5.25-inch drive bay, you can install either an optical or a tape backup unit.

Removing an Optical or Tape Drive

CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that came with the product.

1Turn off the system and attached peripherals, and disconnect the system from the electrical outlet.

2Open the system. See "Opening the System" on page 41.

3Remove the front drive bezel. See "Removing the Front Drive Bezel" on page 42.

4Disconnect the power and data cables from the back of the drive. See Figure 3-7.

5Slide the lever on the sliding plate in the direction of the arrow to release the shoulder screw.

6Slide the drive out to remove it from the drive bay.

Installing System Components

47