HP 7000 dl Router manual Show ip arp, Enable #show ip arp

SROS Command Line Interface Reference Guide Enable Mode Command Set

show ip arp

Use the show ip arp command to display the Address Resolution Protocol (ARP) table.

Syntax Description

No subcommands.

Default Values

No default value necessary for this command.

Command Modes

# Enable Command Mode

Usage Examples

The following is a sample output of the show ip arp command:

>enable

#show ip arp

ADDRESS	TTL (min)	MAC ADDRESS	INTERFACE
10.15.225.162.14	14	00:12:79:11:69:11	eth 0/1

5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 141