52
WebLink Set/Get/Do Commands
weblink.ip.conn[12].enable
weblink.ip.conn[12].enable
Description This command enables or disables the weblink IP connection #1.
A side effect of setting this SGD to "on", the weblink.enable will also be set to "on". When this setting is set to "off", if the weblink.ip.conn2.enable is also "off", the weblink.enable will be set to "off".
Supported Devices
•iMZ 220™, iMZ 320™
•QLn220™, QLn320™, QLn420™
•ZT210™, ZT220™, ZT230™
Type setvar, getvar
Commands | Details | |
|
| |
setvar | This command enables/disables the weblink IP connection. | |
| Format: | |
| • | ! U1 setvar "weblink.ip.conn1.enable" "value" |
| • | ! U1 setvar "weblink.ip.conn2.enable" "value" |
| Values: "on", "off" | |
| Default: "off" | |
|
| |
getvar | This command retrieves the current setting. | |
Format:
•! U1 setvar "weblink.ip.conn1.enable"
•! U1 setvar "weblink.ip.conn2.enable"
Result:
•"on" if the connection is enabled
•"off" if the connection is disabled
| 1/20/15 |
