65
WebLink Set/Get/Do Commands
weblink.logging.max_entries
1/20/15 P1071336-002
weblink.logging.max_entries Description This command specifies the maximum number of individual log entries that
will be stored in the weblink.logging.entries command.
^JUF,^JUS,^JUN,^JUA, and device.restore_defaults do not have any affect on this
setting.
Supported Devices
• iMZ 220™, iMZ 320™
• QLn220™, QLn320™, QLn420™
• ZT210™, ZT220™, ZT230™
Type setvar,getvar ,do
Important • Changes to this command are immediate and may result in some log entries being
lost. If there are N log entries currently in the log, the user sets the max_entires to M, where
M is less than N, the oldest (N-M) log entries will be removed.
Commands Details
setvar This command sets the maximum number of log entires that will be stored.
Format: !U1setvar"weblink.logging.max_entries""value"
Valu es : 0‐10000
Note • Setting the value to 0 disables logging.
Default: "0"
getvar This command returns the setting for the maximum number of log entries that will be stored.
Format: !U1getvar"weblink.logging.max_entries"
do This command sets the maximum number of log entires that will be stored.
Format: !U1do"weblink.logging.max_entries""value"
Valu es : 0‐10000
Note • Setting the value to 0 disables logging.
Default: "0"