54

SGD Wireless Commands

weblink.ip.conn[12].maximum_simultaneous_ connections

weblink.ip.conn[12].maximum_simultaneous_ connections

Description This command indicates the maximum number of simultaneous connections that can be initiated by the printer.

Via the main connection (the original connection initiated by the printer to the remote server), the remote server can request that additional connetions from the printer be initated (e.g. a connection that supports only JSON SGDs, one that behaves similar to the RAW TCP port.

The server is free to request as many as it thinks it needs, but the printer will prevent more than N number of connections, where N is the value of this command.

^JUF, ^JUS, ^JUN, ^JUA, and device.restore_defaults do not have any affect on this setting.

Supported Devices

iMZ 220™, iMZ 320™

QLn220™, QLn320™, QLn420™

ZT210™, ZT220™, ZT230™

Type setvar, getvar

Commands

Details

 

 

setvar

This command sets the maximum number of connections.

Format:

! U1 setvar "weblink.ip.conn1.maximum_simultaneous_connections" "value"

! U1 setvar "weblink.ip.conn2.maximum_simultaneous_connections" "value"

Values: Any integer from 1-100

Default: "10"

getvar

This command retrieves the maximum set number of connections.

Format:

! U1 getvar "weblink.ip.conn1.maximum_simultaneous_connections"

! U1 getvar "weblink.ip.conn2.maximum_simultaneous_connections"

Example • This example sets the conn1 maximum connections to 3.

! U1 setvar "weblink.ip.conn1.maximum_simultaneous_connections" "3"

P1071336-002

1/20/15

Page 54
Image 54
Zebra Technologies P1071336-002 manual Weblink.ip.conn12.maximumsimultaneous connections